processor controller
英 [ˈprəʊsesə(r) kənˈtrəʊlə(r)]
美 [ˈprɑːsesər kənˈtroʊlər]
【计】处理机控制器
双语例句
- This service processor is called a baseboard management controller ( BMC) and resides on a server motherboard or on the chassis of a blade server or telecom platform.
此服务处理器称作基板管理控制器（BMC），驻留在服务器主板上或者刀片服务器或通信平台的底板上。 - To solve the data hazard of embedded processor, a dynamic scheduling controller is designed.
针对嵌入式处理器数据相关问题，设计了一种动态调度控制器。 - A system of measuring light power and wavelength is designed and fabricated, using Silicon Color Sensor with double PN junction as detector, single chip processor as controller and PC as processor.
设计并实现了一种用硅双结色敏器件作为探测器，单片机作为控制器，PC作为处理器和显示器的光功率、波长同步测量系统。 - Abstrac This paper presents a signal processor for realizing a group-asymmetrical PWM controller ( GAPWM), which is used to eliminate striation effect in a fluorescent lamp.
本论文提出讯号处理方法来实现群组非对称脉波宽调变控制器（GAPWM），主要目的在于消除荧光灯之辉纹及简化电路。 - A free-form string describing the video processor/ Controller.
自由形式字符串，用于描述视频处理器/控制器。 - Monolithic Processor Based Picture Tube Match Board Controller
用8031单片机研制的显像管匹配台控制器 - I have studied the designing technique of the interface circuit in the course of designing entirely, have put forward the interface model with the processor and system controller of the base in wireless communication;
笔者在整个设计过程中，研究了接口电路的设计技术，提出了无线通信中基带处理器与系统控制器的接口模型； - If the embedded processor has the I2C controller, the I2C transportation can be achieved by configuring the specific registers of the controller.
嵌入式处理器本身携带I2C控制器时，可以直接通过配置特殊寄存器来实现I2C的功能； - Successful applications of this robot system have demonstrated that, as the first successfully developed Chinese-Chess robot system based on single processor architecture controller, it is open, intellective, dependable and practical.
经实际运行证明，该机器人作为国内利用开放式控制器开发成功的第一台对弈机器人，具有较高的开放性、智能性、可靠性和实用性。 - The Application of PIC Singl_Chip Processor in Boiler Controller
PIC单片机在绿色环保型锅炉控制器中的应用 - FPGA chip is adopted to realize the function of external processor and DMA controller by programming with Verilog HDL. The microprocessor and DMA controller can assist SCSI processor to transmit the data.
利用Veriloghdl语言对FPGA芯片编程实现外部微处理器及DMA控制器功能，从而协调SCSI协议处理器实现数据的存储。 - So, the thesis adopts a type of low loss DSP processor as main controller which composing the control and fault feeder detection system based on DSP in order to deal with the question.
因此论文采用了低功耗的数字信号处理器作为主控芯片，构成一种基于数字信号处理器的控制与选线系统。 - Conversion system is the important device connecting the micro-turbine and users, this paper introduced a conversion system of AC-DC-AC based on the micro-turbine, and the digital signal processor controller was used in this system.
变流系统是连接高速发电机与用户的重要装置，因此这部分的研究也比较重要，本文针对高速发电机系统设计了一套交直交变流系统，控制器采用数字信号处理器。 - It is composed of signal input channel ( A/ D transfer module), signal processor ( micro-chip controller), signal output channel ( D/ A transfer module) and wires, etc.
该导向信号处理装置由信号输入通道（A/D转换模块）、信号处理器（单片机）、信号输出通道（D/A转换模块）、导线等组成。 - After the serial peripheral interface ( SPI) was used to implement communication of Arm processor with CAN controller. CAN-Bus driver program and application program in Arm-Linux embedded system were designed, and the graphical user interface ( GUI) based on Arm-Linux was developed.
Arm处理器以同步外设接口（SPI）方式与CAN控制器相通信，开发了Arm-Linux嵌入式系统下的CAN-Bus驱动及应用程序，且设计了嵌入式环境下图形界面系统（GUI）。 - Paper designs an AE signal collection and processing system based on DSP as the core processor and CPLD as the controller.
本文以DSP为核心处理器，CPLD为系统控制器，设计了一个脱机声发射信号采集处理系统。 - Finally in view of the multi-motor driving belt power-balance control system, DSP ( digital signal processor) fuzzy neural controller is developed. The design of software and hardware of DSP have been finished.
最后本文针对带式输送机多机驱动功率平衡系统，开发了DSP模糊神经网络控制器，并完成了DSP模糊神经网络控制器软硬件的设计工作。 - For improving real-time performance, the project uses independent servo motors that have CAN bus interface to drive the print rollers, cancels the gears, uses ARM core processor as main controller, and uses μ C/ OS-II as software platform.
本方案采用带CAN总线的伺服系统驱动各印刷单元，取消机械主轴，采用ARM处理器做系统主控制器，引入μC/OS-II做主控制器软件开发平台，提高了系统的实时性。 - The sorter consists of 3 main parts: single layer tobacco conveyer, optical and digital video image processor and electric controller.
它主要由烟叶摊薄部分、光学及数字视频处理部分和电控部分3个部分组成。 - As for the hardware, a PC-based host-slave control system, with a digital signal processor ( DSP) as the slave controller was developed in the need of high-speed servo.
在硬件上开发了满足高速伺服需求的、基于工业PC和数字信号处理芯片（DSP）的主从控制结构。 - Display and control terminal 、 the waveform generator 、 the beat signal processor 、 the central controller and the signal processor unite test.
显控终端与波形产生器、差拍处理器、中心控制器及信号处理机的联调。 - Combined with actual example, transparent bidirectional communication between CAN bus and the USB part of computer is realized by single chip processor and CAN controller. Moreover, the methods for software design and hardware realization are devised in this paper.
并结合开发实例，用单片机和CAN控制器实现了计算机USB口与CAN之间的两者之间的透明双向通信，给出了硬件电路的实现和软件设计的方法。 - This interface can be used to data exchange with peripheral apparatus for processor and controller which have not SPI interface function.
通过该方法的介绍，使得那些没有SPI接口功能的处理器和控制器能够扩展SPI接口，以便同外部设备进行数据交换。 - Next, the image processor, the movement controller and the remote supervisory controller are designed.
成功地设计了图像处理器、运动控制器、远程监控器。 - The Realization of Micro processor Based Controller for Two piece Air Conditioner
分体式空调机单片机控制器的实现 - It adopts high-performance DSP ( TMS320C6203) as the core chip to design the high speed processor and system controller to make them effectively fulfill high data volume and high speed image control and guide information processing.
采用高性能DSP（TMS320C6203）为核心，设计了高速处理器和系统控制器，使得高速处理器和系统控制器能够高效地完成大数据量、高速度的图像制导信息处理。 - It includes the ARM processor as the core of the system controller, velocity controller dc motor, intelligent line patrol instrument design.
其主要包括以ARM处理器为核心的系统主控制器、能够精确实现速度直流电机控制器、智能巡线仪的设计。 - The gateway use an ARM processor as a main controller, use a LCD screen and a touch screen to communicate with the user, set the initial parameters and display the system status.
数据网关使用ARM处理器完成主要处理功能，使用LCD液晶屏和触摸屏进行人机交互，完成初始参数的设置，显示系统工作状态。 - The hardware of master and slave modules uses embedded ARM processor with CAN controller as their core CPU and uses the real time operating system& μ C/ OS-ⅱ as their software designing platform.
主/从站硬件采用带有CAN控制器的嵌入式ARM处理器作为它们的核心，并采用μC/OS-Ⅱ嵌入式实时操作系统作为软件开发平台。